Yes, is the short and simple answer, Why? well read on.
This question is often asked because the explanation of MNA is to monitor the concentrations of contaminants as they (hopefully) decrease. MNA is usually carried out on hydrocarbons in groundwater, a scenario where natural processes reduce concentrations.
MNA can be an extensive and complicated process, monitoring groundwater concentrations can involve regular site visits and sampling rounds over several years with in depth analysis and modelling of the data accrued. In addition to this monitoring can result in detection of increasing concentrations of contaminants which can trigger a requirement for ‘active’ remediation. Increases in contaminants can result from natural processes, some by-products of attenuation are themselves contaminants e.g. Vinyl Chloride produced from the degradation of Tetrachloroethene (TCE), or from changing ground conditions such as fluctuating groundwater levels.
Great resources on MNA are available for free from regulators, check out these links below-
Environment Agency – http://bit.ly/W71pRP
Northern Irish Environment Agency – http://bit.ly/V8h47v
NICOLE – http://bit.ly/W0pMmp
Western Australia Guidance – http://bit.ly/10c676r
Enjoy. If have any questions please do not hesitate to get in contact with us.
Soil remediation guide
Approaching soil remediation without any prior knowledge can be difficult and uncomfortable at times, especially when it can potentially be very costly. This free eBook will help you understand the whats, the whys and the hows of soil remediation in the simplest terms.